Raised toilet seat with armrests

A toilet seat raiser with armrests is a practical aid that increases the seat height of the toilet by 10 cm and provides extra support when sitting down and standing up. The product features a white polypropylene seat, a lid, and two removable aluminium armrests. It is installed without tools using adjustable side brackets and has a maximum user weight of 100 kg.

Higher seat height with support on both sides

A toilet seat raiser with armrests can facilitate toilet visits for individuals with limited mobility or difficulty bending their knees and hips. The raised seat surface reduces the need to sit down deeply, while the armrests provide support for the hands when sitting down and standing up.

Distance between seat and armrest

The distance from the top of the raised seat to the highest gripping surface of the armrests, where the hands are placed, is approximately 13 cm.

The measurement is calculated based on the manufacturer's dimensional drawing. The top edge of the armrests is 23 cm above the bottom edge of the structure, while the seat height increase is 10 cm. The height difference is therefore approximately 13 cm.

Simple installation without tools
The armrests are inserted into the numbered holes under the seat and locked with metal buttons. They can be easily removed by pressing the buttons.

The raiser is placed flat on the toilet and secured with two adjustable side brackets that are tightened by hand. Ensure the product is secure before use.

Check the toilet dimensions
To ensure that a toilet seat raiser with armrests will fit, the toilet's dimensions must be checked before purchase.

The internal length of the toilet must exceed 27.5 cm and the internal width must exceed 21.5 cm. The external width at the specified measuring point must be greater than 34 cm but less than 39 cm.

The distance from the toilet's centre line to the nearest wall must exceed 25 cm. The product fits many classic oval toilets that meet these dimensions.

Removable armrests and lid
The seat has a smooth surface that facilitates cleaning. The removable aluminium armrests provide support from both sides and can be dismantled if necessary.

A lid is included to cover the seat opening when the toilet is not in use. The lid must not be used as a seating surface.

Safe use
The armrests are intended to assist with sitting down and standing up but must not be subjected to the user's full body weight. Also, avoid putting the entire load on a single armrest.

Check the side brackets regularly and tighten them if necessary. Do not use the product if any part is damaged.

Cleaning and maintenance
A toilet seat raiser with armrests can be cleaned with soap and warm water. All parts can also be disinfected with suitable cleaning agents without abrasive substances.

The product should be disinfected before being used by another person. At the same time, check that all parts and fastenings are in good condition.

Technical specifications
Seat material: Polypropylene (PP)
Armrest material: Aluminium
Colour: White seat with grey armrests
Seat height increase: 10 cm
Height from top of seat to highest gripping surface of armrests: Approximately 13 cm (calculated)
Height of armrests according to dimensional drawing: 23 cm
Seat dimensions (height × length × width): 10 × 41 × 36.5 cm
Seat opening: 21.5 × 27.5 cm
Armrest dimensions: 23 × 49 × 32 cm
Internal armrest dimensions: 42 × 26 cm
Weight: Approximately 1.5 kg
Maximum user weight: 100 kg
Armrests: Two removable armrests
Lid: Yes
Installation: Tool-free
Fasteners: Two adjustable side brackets
Cleaning: Soap, warm water, or non-abrasive disinfectant